Parquet Teak Inlay Sauna Lounge Floor White Flooring

Bourne - Gleem Clear Floor


Bourne Gleem Clear Floor is a low odour, waterbased wood sealer for use on all interior wooden floors. Bourne Gleem Clear Floor dries to a smooth, tough finish which is abrasion, water and chemical resistant. Suitable for parquet flooring.

Product code:
Pack Size: 1l and 5l
Spreading rate: Hardwoods : ± 10m² / l
Softwoods : ± 6m² / l
Bourne Gleem Clean Floor


Interior Wooden Floors

All interior wooden floors

Parquet Flooring

Parquet flooring


  1. Requires no polishing
  2. Tough and resilient wood sealer


  • Power-sand new and old interior wooden floors with a commercial sanding machine (three cuts: coarse, medium and fine) to remove all traces of wax, paint, oil, paraffin, detergents, etc
  • Do not wash wooden floors
  • Sanding discs fitted to electric drills and domestic sanding machines are not suitable
  • Do not apply paraffin to hardwood floors before sanding to enable sandpaper to get "grip" as th is will affect the sealer
  • On strip-floors, the machine must travel with the runs of the boards
  • After deep sanding, sweep or vacuum thoroughly, as dust and grit will impair the quality of the finish
  • If a change of wood colour is desired, Nova 18 Woodstain can be applied prior to sealin


  • Apply a liberal coat of Bourne Gleem (using a Bourne Applicator) with light even strokes.
  • Do not rub
  • Allow to dry for four hours
  • Hand sand wooden floors using 100 grit sand paper.
  • Remove all dust and apply a liberal second coat with an extra thick application in areas of heavy traffic
  • A third coat of this wood sealer can be applied if required after 4 hours and light hand sanding with 220 grit sand paper
  • Leave the applicator immersed in Bourne Gleem between coats
  • Allow to dry and protect from heavy water for 12 hours.
  • The floor will be walk dry in 4 - 5 hours
  • Bourne Gleem can be removed with Nova 11 (Nova Brush Cleaner) On parquet flooring apply a thin first coat to seal the floor and allow to dry for at least 8 hours. A heavy first coat may cause the blocks to swell and become loose.


  • To obtain a "matt" finish with Bourne Gleem Clear Floor wood sealer, rub down surface 48 hours after the final coat with fine steel wool and mineral turpentine.