Parquet Teak Inlay Sauna Lounge Floor White Flooring
Genkem

Nova 15 - Timeberseal

 

PRODUCT INFORMATION

High quality, non-gloss wood sealer for outdoor timber. Deep penetrating action seals outdoor wood and timberwork against the damaging effects of sun, rain, heat and cold. Provides protection against ultra violet rays and fungi such as mildew as well as being weather and water resistant.

Product code:
NOVA 15
Pack Size: 1l and 5l
Nova 15 - Timberseal

PRODUCT USES

Product uses - Window frames, garage doors, garden furniture, pergolas, deck, gates, ect

Window frames, garage doors, garden furniture, pergolas, decks, gates, etc.

FEATURES

  1. Non-gloss finish
  2. Nova 15 Timberseal wood sealer offers protection against termites and woodborer.
  3. Nova 15 Nova 15 Timberseal wood sealer penetrates deep into the wood, protecting against moisture, mildew and sun. Overcoating is simple, as preparation is minimal provided the wood has not been allowed to deteriorate.
  4. Drying takes up to 7 days depending on thickness applied, ambient Temperature and species of wood.
  5. Nova 15 Timberseal wood sealer may be overcoated with Nova 14 Novaseal if a more glossy finish is required, but only after the Nova 15 Timberseal has been allowed to dry for at least 48 hours.

COLOURS

Clear
Teak
Mahogany
Clear
Teak
MAHOGANY

PREPERATION

  • Clean surfaces with mineral turpentine and steel wool.
  • Sand to a fine, smooth finish.
  • Remove residues of old paint or varnish with Nova 8 Novastrip, followed by Nova 10 Nova Wax.
  • Remove, rinse well and allow to dry.
  • Sand to a fine smooth finish. Severely neglected surfaces need deeper sanding to remove dry rot. Less severely neglected surfaces may be restored by brushing on a mixture of 1 part washing soda in 10 parts water, leaving for 10 - 30 minutes and removing the sludge with a scrubbing brush.
  • Rinse thoroughly with warm water, allow to dry and sand to a fine, smooth finish.

APPLICATION

  • Ensure that wood is properly dry.
  • Stir well before use.
  • Do not thin.
  • Apply first coat of wood sealer using a clean brush. Work in well, especially on end grain.
  • Allow to dry for 24 hours. (Allow more time in cold or damp weather).
  • Apply a second coat of wood sealer.
  • Apply a third coat wood sealer to soft or neglected wood or end grain.
  • Clean equipment immediately after use with Nova 11 Brush Cleaner or mineral turpentine.
  • For improved UV resistance, always use Nova 15 Timberseal Teak or Mahogany for the first coat. Nova 15 Timberseal Clear may be used for subsequent coats especially if the colour of the wood is important.

HINTS & TIPS

  • If possible, purchase containers with the same batch number on them to avoid possible colour variation
  • Where darkening of the timber is undesirable, Nova 15 Timberseal Clear may be used, as long as the first coat was coloured.