Nova 3 Slate 'n Quarry Tile Dressing

PRODUCT INFORMATION

Slate 'n Quarry Tile Dressing is a wax dressing used to restore the natural colours and textures of non-porous stone surfaces such as slate flooring, quarry tiles, marble, etc. Can be used on both interior and exterior surfaces.

Product code:	NOVA 3
Pack Size:	1l and 5l
Spreading rate:	20 m2/l

PRODUCT USES

Slate flooring and other relatively non-porous stone surfaces.

FEATURES

Restores the natural colours and textures of quarry tiles, black and coloured slate flooring and marble.
Can be used on both interior and exterior surfaces

PREPERATION

Old slate flooring should have all dirt and dust removed from areas to be sealed using a hard bristle or wire brush.
Any waxes should be removed with Nova 10 Wax Remover, or, in extreme cases, Nova 8 Novastrip.
The surface should then be scrubbed well using a solution of household detergent in water, rinsed thoroughly with clean water and allowed to dry completely.
Newly built surfaces should be allowed to mature for at least four weeks.
Any building residue should be removed with Tile Doctor Lift Off

APPLICATION

Apply sparingly, using a floor polish brush. Rub in well, leaving a trace of Nova 3 on the surface.
Allow slate flooring to dry for 3 - 4 hours, then buff to a shine by hand or with a polishing machine.
When applied indoors, a coat of Nova 13 Deepshine may be applied over the Nova 3 Slate and Quarry Tile Dressing to increase the gloss.
Clean equipment and spillages with Nova 11 Brush Cleaner

HINTS & TIPS

Interior surfaces may be maintained using Nova 13 Deepshine.
Every two months a fresh coat of Nova 13 Deepshine may be applied.
Outdoor slate flooring should be swept regularly, and a fresh coat of Nova 3 Slate and Quarry Tile Dressing reapplied every 6 months as before.